As I posted previously I'm not supposed to ride for a year. I talked to the doc and he has relented to let me ride in two months as long as I don't take long rides and stop often to stretch my legs and empty my bladder. I sold my Vic and have some extra cash, enough to do a S&S 106" kit with S&S ported heads and 585 gear drive cams. Since I am also unemployed at the time I hate to deplete my cash reserves. I am thinking about just doing the cams for starters. So here's the questions; can I run the 585 with my stock valve springs? Is the compression too low on the stock 96 to use these cams? Should I just bite the bullet and do it all now? I already have D&D Fat Cat 2into1, SE heavy breather and PCV.
My thinking is, if it's in the shop instead of the garage there will be less temptation to ride it before I'm supposed to.
later, dozer
p.s. I did a search and came up with a lot of info on cams but no answers to my specific questions
p.p.s. I do have a couple of leads on jobs but not until June or July
My thinking is, if it's in the shop instead of the garage there will be less temptation to ride it before I'm supposed to.
later, dozer
p.s. I did a search and came up with a lot of info on cams but no answers to my specific questions
p.p.s. I do have a couple of leads on jobs but not until June or July