|
Yes it will work. It might grab a little quicker because the 3/4" bore is moving more fluid per the same lever travel. The bore difference isn't that crazy different, and the pull leverage on HD's masters don't change, so that ratio isn't even an issue.
Larger bore: Yes. I wouldn't recommend going smaller, especially on the front.
__________________
HERD meber #10
DISCLAIMER: Any information, advice or child raising tips I give on this forum should be taken with a grain of salt, 8 hours sleep and at least 6 beers.
Following my instructions will likely lead to death, mental retardation and/or bodily injury, consistant with eating lead-based paint chips, and by doing so, will release me, my family and my dog from any legal action(s) for listening to anything I recommended. 
|
Linear Mode
