» Site Navigation |
|
» » » » Motorcycle Forums
|
|
» Links |
|
|
|
 |
|
10-23-2009, 03:44 PM
|
#1 (permalink)
|
|
hooray beer!
Join Date: Feb 2009
Location: statesville NC
Posts: 1,212
|
wtb drag bars
i'm looking for some drag bars to put on the vrod. not worried about rust or scratches as i'm going to have them powder coated. any body got some drag bars laying around you don't want or need?
thanks
rob
__________________
 2009 Farmington Dragway Motorcycle Class Champion
herd member # 13
Robs facebook
|
|
|
|
10-23-2009, 03:47 PM
|
#2 (permalink)
|
|
"Ain't quite right"
Join Date: Dec 2008
Location: Texas
Posts: 3,921
|
what about my stock DX bars? You pay the shipping, I'll send em.
__________________
'08 DX:
Mirrors-Reactor Wheels and Pulley- CFR- Grips-Metz 260- Drag Bars-Turn Signal Relocation-Topless
Your thread is boring, let's change the subject...
Quote:
Originally Posted by Rockerbox1
.....Motive we know
he aint quite right.....
|
Quote:
Originally Posted by XDixiecratX
Well Motive, stay out of Vegas, cause you aint playin with a full deck.
|
|
|
|
|
|
10-23-2009, 03:47 PM
|
#3 (permalink)
|
|
Mentally unstable.
Join Date: Jun 2008
Location: Pennsyltucky
Posts: 6,627
|
Diameter?
1"
7/8"
The thickness of my member?  (1/4")
Do they need to have dimples to clear for a harness?
__________________
HERD meber #10
DISCLAIMER: Any information, advice or child raising tips I give on this forum should be taken with a grain of salt, 8 hours sleep and at least 6 beers.
Following my instructions will likely lead to death, mental retardation and/or bodily injury, consistant with eating lead-based paint chips, and by doing so, will release me, my family and my dog from any legal action(s) for listening to anything I recommended. 
|
|
|
|
|
10-23-2009, 03:52 PM
|
#4 (permalink)
|
|
hooray beer!
Join Date: Feb 2009
Location: statesville NC
Posts: 1,212
|
1 inch. not sure about the dimples,probably does need the dimples.
motive does your stock dx bars have dimples?
__________________
2009 Farmington Dragway Motorcycle Class Champion
herd member # 13
Robs facebook
|
|
|
|
|
10-23-2009, 03:53 PM
|
#5 (permalink)
|
|
"Ain't quite right"
Join Date: Dec 2008
Location: Texas
Posts: 3,921
|
yep (dimpled), but it's got some rise and a little pullback...but less than the other Vrods I believe..maybe they can hold you over till I finally get offa my ass and get rid of the ones I'm currently running for less pullback.
Not 100% sure the DX and the D have different bars though.
__________________
'08 DX:
Mirrors-Reactor Wheels and Pulley- CFR- Grips-Metz 260- Drag Bars-Turn Signal Relocation-Topless
Your thread is boring, let's change the subject...
Quote:
Originally Posted by Rockerbox1
.....Motive we know
he aint quite right.....
|
Quote:
Originally Posted by XDixiecratX
Well Motive, stay out of Vegas, cause you aint playin with a full deck.
|
|
|
|
|
|
10-23-2009, 03:55 PM
|
#6 (permalink)
|
|
hooray beer!
Join Date: Feb 2009
Location: statesville NC
Posts: 1,212
|
i think the stock dx bars are the same as the stock D bars.
__________________
2009 Farmington Dragway Motorcycle Class Champion
herd member # 13
Robs facebook
|
|
|
|
|
10-23-2009, 03:56 PM
|
#7 (permalink)
|
|
hooray beer!
Join Date: Feb 2009
Location: statesville NC
Posts: 1,212
|
what you got dave? if you ain't got any, i think i'll try motives bars to see if i like it.
__________________
2009 Farmington Dragway Motorcycle Class Champion
herd member # 13
Robs facebook
|
|
|
|
|
10-23-2009, 03:58 PM
|
#8 (permalink)
|
|
Mentally unstable.
Join Date: Jun 2008
Location: Pennsyltucky
Posts: 6,627
|
I have Vintage FL bars, with dimples. W-I-D-E but low.......
__________________
HERD meber #10
DISCLAIMER: Any information, advice or child raising tips I give on this forum should be taken with a grain of salt, 8 hours sleep and at least 6 beers.
Following my instructions will likely lead to death, mental retardation and/or bodily injury, consistant with eating lead-based paint chips, and by doing so, will release me, my family and my dog from any legal action(s) for listening to anything I recommended.
|
|
|
|
|
10-23-2009, 04:01 PM
|
#9 (permalink)
|
|
hooray beer!
Join Date: Feb 2009
Location: statesville NC
Posts: 1,212
|
my stock bars are 28 or 30 wide, how wide are the fl bars dave.
__________________
2009 Farmington Dragway Motorcycle Class Champion
herd member # 13
Robs facebook
|
|
|
|
|
10-23-2009, 04:05 PM
|
#10 (permalink)
|
|
Mentally unstable.
Join Date: Jun 2008
Location: Pennsyltucky
Posts: 6,627
|
35" wide with a 4" rise and a 9" pullback from the last bend to the end of the bar.
Could be trimmed a little if needed.
1961 style, low FL bars, but with dimples for modern controls.
Need pics?
__________________
HERD meber #10
DISCLAIMER: Any information, advice or child raising tips I give on this forum should be taken with a grain of salt, 8 hours sleep and at least 6 beers.
Following my instructions will likely lead to death, mental retardation and/or bodily injury, consistant with eating lead-based paint chips, and by doing so, will release me, my family and my dog from any legal action(s) for listening to anything I recommended.
|
|
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
