09 road king keeps popping turn signal fuse

[radfabber]

heres what Ive checked,light bulbs and wires to the turn signals, all wires under seat... The same fuse powers cruze control....does not blow fuse while running only after shutting engine off. Ive even tried running everything at once including the horn and it wont blow the fuse... Also I had it detailed,problem started after. they did not use high pressure or air to dry,,,,,Im stumped any one had this problem

[Dave63]

Originally Posted by radfabber

The same fuse powers cruze control....does not blow fuse while running only after shutting engine off. Ive even tried running everything at once including the horn and it wont blow the fuse... Also I had it detailed,problem started after. they did not use high pressure or air to dry,,,,,Im stumped any one had this problem

Look at the security system, if equiped. Security system only activated when engine is turned off.....

[radfabber]

the only way I know how to disarm the alarm is leave the key fob on the bike ...Ill give that a try see how it does,,,,thanks Dave

[bstew6119]

Did you resolve your problem? My 09 Road King is doing the same thing but it appears mine does it while running. I replaced the fuse, check the lights, cranked up, checked the lights, drove less than a mile and notice my turn signals were out again.