Quote:
Originally Posted by simplemanrt
99 fxstc.no neutral or oil light on.when starting bike or shifting to nuetral.replaced oil sending unit,replaced bulbs in dash still no lights
|
Check bulb sockets for power. Those bulbs and sockets get a ton of vibration. Also, ground your neutral switch wire. Does the light come on then?
Now try the same test with the oil sending unit wire. Does the light come on?
Both those sensors have constant power, and rely on a ground triggering the ground part of the bulb.
If you ground the sensor wires and no light, then start looking for an interupted power source.
__________________
HERD meber #10
DISCLAIMER: Any information, advice or child raising tips I give on this forum should be taken with a grain of salt, 8 hours sleep and at least 6 beers.
Following my instructions will likely lead to death, mental retardation and/or bodily injury, consistant with eating lead-based paint chips, and by doing so, will release me, my family and my dog from any legal action(s) for listening to anything I recommended.
Linear Mode
