|
Considering Engine upgrade
I have a 2008 Road King that the dealer installed a 103 kit, SE 255 cam and racer tuner. Since they didn't address the intake or exhaust I had them install the Stage 2 intake, filter and put D&D 2 into 1 exhaust on the bike. It dyno'd at 97 ft lbs torque and 79 hp. Which I thought seemed low on the HP. Wanted a little more power and have talked two performance shops about an S&S 551 cam, Porting heads and a Power Commander to get the torque up another 8-10 and the HP up close to 100. Both shops have said the combination is fine and will help. They also said I should be close to the number already, saying both torque and hp should lightly above a hundred with what's already done to the bike. Anyone out there have any idea what the motor should be making as it is and is what I'm considering a descent way to go for the future. Any help would be appreciated
JoJeff
|
Linear Mode
