2009 Road King loosing most engine power

[ghostrider2012]

Okay I will just have to take it to the shop then cause this is sounding like something out of my techinical area....dont want to screw something else up.

Sent from my SAMSUNG using Motorcycle.com Free App

[Dave63]

That's the code that comes up when the plug is dirty, loose or has a damaged pin or wire. Unplug it and inspect it before you pay a dealer good money for something that may be a simple fix.

Yes, it's the TBW actuator code, but that's the expected code for the diagnosis and repair I gave you........

[ghostrider2012]

Okay thanks ill try that later today

Sent from my SAMSUNG using Motorcycle.com Free App

[ghostrider2012]

Okay the pins and wires looked good. So I went ahead and took it to the shop and they said its related to the sensor I already had go out so theyre gonna fix it for free. Ill post how it comes out.

Sent from my SAMSUNG using Motorcycle.com Free App

[Dave63]

Originally Posted by ghostrider2012

Okay the pins and wires looked good. So I went ahead and took it to the shop and they said its related to the sensor I already had go out so theyre gonna fix it for free. Ill post how it comes out.

Sent from my SAMSUNG using Motorcycle.com Free App

If they get the same results as you and decide to replace the sensor under warranty and it fixes it.....bonus!

[ghostrider2012]

Yep thats what I said especially since the extended warranty is already expired. But they said they were gonna do it under it anyways.

Sent from my SAMSUNG using Motorcycle.com Free App

[Dave63]

Well, despite popular belief, there are dealerships out there willing to go the extra mile for customers. Sounds like you have good one.

[ghostrider2012]

They have always tried to do right. I cant complain. They will always have my service. Now I just gotta look at getting another extended service plan so I dont end up...up a creek. Like I could have this time. Just gotta get the money together cause theyre not cheap.

Sent from my SAMSUNG using Motorcycle.com Free App

[bud]

Too minimize I give my Ultra a sponge bath & use a leaf blower to dry excess water . Then I take a clean pale of water & rag & wipe away the streaks away with good results .
I always keep my Harley in a enclosed garage or cargo trailer when I need the warm space to work on a project . Just my thoughts Bud

[ghostrider2012]

Well they got it all fixed up and got it home. They said it wasnt the male end of the pins but the female ends. They said back around 2009 that Harley used an inferior type of metal on both ends of the pins and the male ends had already been replaced but the female ends havent been. But they did the work on the house so I dont have anything to complain about. Awesome dealership.

Sent from my SAMSUNG-SGH-I897 using Motorcycle.com Free App