Rinehart Exhaust

[Bikerboy51]

Hello all,

I recently picked up a set of the Rinehart Slip-on exhaust tubes for a 2009 Road King Classic, after installing them, it looks like the pipes are not straight back from the header, but are angled slightly outward toward the rear of the bike, what's up with that?...is this normal?...I've never really noticed the factory pipes being that way...

Thanks in advance

[Jacket4256]

you may have tighten the bolts, to the muffs to tight and it will cause them to twist

[Bikerboy51]

Originally Posted by Jacket4256

you may have tighten the bolts, to the muffs to tight and it will cause them to twist

Hi Jacket,

Thanks for your reply, but I really don't think that's what's happeneing here, the guy at Rinehart DID say that there were three screws that held the end-cap and that there shouldn't be a screw head visible on the outside, after checking them, I did have the screw head visible so I took em off, but haven't reinstalled yet, maybe there IS a right and left side to these and will make a difference, we'll see I guess...