Cams , Andrews 26H or 37H, for 2007 fatboy

[richie]

Presently running PC V, Khrome Werks slip ons, and Arlen Ness Big Sucker, have seen a bit of increase in performance , would like a bit more in the low to midrange, do not want to go to a 103 Kit. Most of my driving is back country roads with an occasional jaunt on the highway. Have read the specs on both cams, appears to be about a 400 rpm difference in the torque curve where they come on with power and end 1800 to 5200 vs 2200 to 5600 RPM. Looking for some input from someone with some real world experience with a similar setup , Thanks.

[Blackdog 15]

what does the "H" stand for ? I'm planning on ptting an Andrews 37G in my 05 TC 88

[richie]

Don;t know , that is the latest configuration in their web site at Andrews for an 07 softail.

[Blackdog 15]

The 37G is the gear drive cam setup...it does away with the HD cam chains and the problems they have...while I'm doing the swap, I'm also replacing the stock cam plate and oil pump with the Feuling units, far superior performance, brings up oil pressure and flow...