Yes these are the 10" baggernation Paul Yaffe Original monkey bagger bars i believe there called. Black or Chrome.
The install took me about 6-7 hours, BUT I have an engine light and no cruise control. I was able to ride it and it is very comfortable just like everyone said. I'm going to do some trouble shooting to see if i grounded a wire internally somewhere wire wiring them. The job is very easy but i think i russhed it a little because it was easier than i thought and i had the bike apart and everything for the wiring in the house in the A/C in about an hour. The wiring took about 3 hours with a lot of cussing and trying differnt things. And then about 2 1/2 to 3 hours putting it back together with poor lighting, i should have waited until morning but was to excited.
Turned the bike on and the engine light came on but started easy and ran good. I took it for a ride after making sure all my lights were working and thats when i saw that the cc wasn't working. Ill get it figured out during the four day weekend i have this weekend, and worse case i'll take it to the dealer now that 95% of the work is done and see if they have any tricks.
2010 Street Glide, SE 120R 125HP/125TQ