Harley Davidson Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Trans/Primary
    I was using the spring compression tool to remove the spring plate and the housing that retains the release bearing broke. It looked like it was already cracked (probably the previous owner) so I tried not to put too much pressure using the compression tool, but it wouldn't tighten enough to...
  2. Softail General Discussions
    I was riding Sunday felt kinda like the clutch was slipping when I would try to get on it the rpm will go up but not the speed took a while to catch up then I finally lost power completely bike goes into gear but doesn’t move also doesn’t stall while in gear and clutch is out almost like it’s...
  3. Trans/Primary
    I have a 2019 sporty and i have came up with a way to eliminate the need of using a clutch spring compressor tool. On these clutch baskets i feel the aluminum fingers on them that hold the retai ing ring in place aregarbage because the lios on the easily crakck or break off if ur not careful. If...
  4. Trans/Primary
    Hello all, I have a 91 xlh 883 that will not move once put in gear . Since this problem first arose I have replaced clutch with a Barnett's extra plate kit and adjusted it to spec did nothing. I believe it is something to do with the clutch basket the problem started while moving down the road.
1-4 of 4 Results
Top