Harley Davidson Forums banner

1 - 5 of 5 Posts

·
Old Member
Joined
·
2,896 Posts
How can I tell if my idle is set to parade mode?
I believe this is for 08-09 FL's only.

EITMS can be enabled or disabled by the rider using the following procedure.

1. Turn the ignition switch to the ON position (do not start the motorcycle).

2. Push the throttle to roll-off position and hold.

3. After approx. 3 seconds, the cruise indicator lamp will will either flash green (EITMS enabled) or red (EITMS disabled).

4. Repeat the procedure as needed to enable or disable EITMS.
 

·
2007 Ultra Classic
Joined
·
1,285 Posts
I believe this is for 08-09 FL's only.

EITMS can be enabled or disabled by the rider using the following procedure.

1. Turn the ignition switch to the ON position (do not start the motorcycle).

2. Push the throttle to roll-off position and hold.

3. After approx. 3 seconds, the cruise indicator lamp will will either flash green (EITMS enabled) or red (EITMS disabled).

4. Repeat the procedure as needed to enable or disable EITMS.
Correct.

The 07's need a download to make the back cylinder shut off when setting in stop and go traffic.
 

·
Registered
Joined
·
327 Posts
The 07's don't have that function. That makes me happy, one more thing you don't have to worry about fixing.
 
1 - 5 of 5 Posts
Top