[Dat_dyna_dude]

So got my front end finished and need to do the “fall away” test. One side falls away at about 3”, the other side falls away immediately. How can I balance so the fall at the same distance? Newbie here 🤷🏻‍♂️

 

[SCHMIDTY]

So got my front end finished and need to do the “fall away” test. One side falls away at about 3”, the other side falls away immediately. How can I balance so the fall at the same distance? Newbie here 🤷🏻‍♂️

The tire doesn't need to be centered just in the middle of both the fall away points. Find the center and position a pointer at the middle of the fender with a piece of painters tape on the fender to make some pencil marks. Mark the center between fall away points then measure both doing the fall away test.

 

[Breeze3at]

And clutch cable disconnected from lever of course.