There is a noticeable increase in vibration when I reach 3100 rpms in any gear. I can feel it in my feet. As soon as you drop below 3100 it immediately feels better and more normal.
I do have crossthread MX pegs, but these are the same pegs I had on '20 lrs and '22 lrst with no issues. Husband also has on his dyna lrs with no problems. Lock tite was used at install and yet on Friday I almost lost my peg while riding. The bolt had backed out and was barely there and the peg had turned upside down while my feet were up.
Stock cam, breather, tune. Did just put a 2-1 exhaust on but it was doing that prior to install. I've added vibration dampeners to both sides of handlebar as well as thicker air cushioned grips to make that more tolerable. My left mirror step also keeps flopping toward me, never had this happen before.
Anyone else experience this much vibration above 3100 rpms? Thoughts?
I do have crossthread MX pegs, but these are the same pegs I had on '20 lrs and '22 lrst with no issues. Husband also has on his dyna lrs with no problems. Lock tite was used at install and yet on Friday I almost lost my peg while riding. The bolt had backed out and was barely there and the peg had turned upside down while my feet were up.
Stock cam, breather, tune. Did just put a 2-1 exhaust on but it was doing that prior to install. I've added vibration dampeners to both sides of handlebar as well as thicker air cushioned grips to make that more tolerable. My left mirror step also keeps flopping toward me, never had this happen before.
Anyone else experience this much vibration above 3100 rpms? Thoughts?
