Harley Davidson Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
Running and brakes lights have power, no power to turn signals, or emergency flashers, put in new turn signal module and changed all dash bulbs, still no power. We were attempting to put in LED rear light in when we list power to turn signals. Trouble shooting help needed, please.

Sent from Motorcycle.com Free App
 

·
Retired citizen
Joined
·
23,206 Posts
Check the fuses with a tester not your eyeballs. The turns are on a different circuit than the rest of the lights.
Also you'll need a load equalizer for the LEDs to function.
 

·
Harley Rider
Joined
·
10,488 Posts
Make sure you test with a VOM to check for continuity as well as voltage.
 

·
Retired citizen
Joined
·
23,206 Posts
Check the Signal Stat, should be located under the dash between the tanks.
Scratch this post...no signal stat.
 
1 - 6 of 6 Posts
Top