Harley Davidson Forums banner

Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
36,947 Posts
Discussion Starter #1
For pushbutton fob (PN 68926-00)

1) Set RUN/OFF switch to OFF
2) Turn Ignition/headlamp switch ON-OFF-ON-OFF-ON
3) Press left turn switch 2 times and release.
Turn signals will flash 4 times (1 time if there is no security module, 2 times for Japan/Korea TSSM)
4) Press right turn switch 1 time and release.
Turn signals will flash 1 time as confirmation
5) Press left turn switch 1 time and release.
Turn signals will flash 2 times as confirmation
6) Press and hold key fob button until confirmation is received (about 5 seconds).
Turn signals will flash 2 times as confirmation.
7) If you have a second fob, press and hold button on second key fob until confirmation is received.
Turn signals will flash 2 times as confirmation.
8) Turn ignition/headlamp switch to OFF.




The fobs without the button must be assigned by your dealer.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top