Boom Box Update Version 1.18.3 now available

7029 Views 19 Replies 10 Participants Last post by speed4tu, Feb 3, 2015

Boomerhd

Discussion Starter · Jan 21, 2015

Sorry for making a new thread about this, but the original thread on updates has gotten to be 6 pages. I did not want to bury this in it as it might not be seen.

Download it here.

Software Downloads | Infotainment System | Harley-Davidson USA

1 - 20 of 20 Posts

Wrgiacona

· #2 · Jan 21, 2015

I'm not going to be the first to load it but it does say it changes a couple of issues I've seen.

Date Released: 01/19/2015
Change Log:
- Added capability to view information about a point of Interest, H-D dealership, recent destination, saved destination, home, or XM fuel price station while in a current route
- Added capability to cancel "Next Waypoint"
- Increased waypoints to 100
- Fixed automatic screen brightness
- Fixed map zoom level
- Performance and stability enhancements

Boomerhd

Discussion Starter · #3 · Jan 21, 2015

I installed it a few minutes after posting. Will see tomorrow how things work out. Took about 7 minutes to install.

Ankartross

· #4 · Jan 24, 2015

The ISO image on the attached USB is corrupt or incompatible"

I have tried
1. I did download the zip file (on my PC)-I selected Premium CVO Radio, since I have an Ultra Limited CVO 2015
2. I opened the zip file and copied the ISO file to my USB (greater than 8 GB)
3. But when I connect it to my bike I get a fault message "The ISO image on the attached USB is corrupt or incompatible".

What to do?

I have tried to download again, but still the same fault

See less See more

Ankartross

· #5 · Jan 24, 2015

One more question, the zip file contains of 2 files, txt and ISO. Should both be copied to the USB?

Ankartross

· #6 · Jan 24, 2015

One more question
On my bike it says HD P/N 76000229
In the txt file it says HD P/N 76000228

Can this be the problem, should it not be the same HD P/N? Or what is this for?

Philrod

· #7 · Jan 24, 2015

Make sure you are using the correct ISO file. There are 3 files on the web site. One for the 4.3 boom box, one for the 6.5, and another for the CVO.

Ankartross

· #8 · Jan 24, 2015

Philrod said:
Make sure you are using the correct ISO file. There are 3 files on the web site. One for the 4.3 boom box, one for the 6.5, and another for the CVO.

Yes I have taken the one for CVO, since I have a Ultra Limited CVO 2015

streetglide14

· #9 · Jan 25, 2015 (Edited)

Try this if you haven't already.

Create a new folder on your computer just for the downloaded zip file and then save the correct file for your bike to that new folder. Then unzip the contents of that .zip file to the same folder. Now copy just the .iso file to an empty 8GB flash drive. Try the update.

Oldnewrider

· #10 · Jan 25, 2015

Worked slicker than a runny nose at 70 mph in 30 degree snow storm.

Snuskeeter

· #11 · Jan 25, 2015

Boomerhd said:
Sorry for making a new thread about this, but the original thread on updates has gotten to be 6 pages. I did not want to bury this in it as it might not be seen.

Download it here.

Software Downloads | Infotainment System | Harley-Davidson USA

I just did mine (took 5 minutes) and fixing to go for a ride. Thanks for the thread and link Boomer!

:biker:

Ankartross

· #12 · Jan 25, 2015

streetglide14 said:
Try this if you haven't already.

Create a new folder on your computer just for the downloaded zip file and then save the correct file for your bike to that new folder. Then unzip the contents of that .zip file to the same folder. Now copy just the .iso file to an empty 8GB flash drive. Try the update.

This is the way I did it, first I copied only the ISO file to a large USB drive (more than 8 GB)-it did not work, then I copied also the txt file-it did not work

But I did check the Hardware information (Home->Setup->System information) Here the HD Part # the Boom box is 76000229, while in the txt file it say 76000228. I suspect this is not correct...? Have anyone of you that mange to get it working possibility to check if you have the equal numbers or if it also differ?

Has anyone got a Ultra Limited CVO and been able to update?

Philrod

· #13 · Jan 25, 2015

Ankartross said:
This is the way I did it, first I copied only the ISO file to a large USB drive (more than 8 GB)-it did not work, then I copied also the txt file-it did not work

But I did check the Hardware information (Home->Setup->System information) Here the HD Part # the Boom box is 76000229, while in the txt file it say 76000228. I suspect this is not correct...? Have anyone of you that mange to get it working possibility to check if you have the equal numbers or if it also differ?

Has anyone got a Ultra Limited CVO and been able to update?

I suspect it's because you are in Sweden and the file is for the US version of the boom box system.

streetglide14

· #14 · Jan 25, 2015

Philrod said:
I suspect it's because you are in Sweden and the file is for the US version of the boom box system.

That is a possibility.

Ankartross, you should check with your local Harley dealer for the facts on these updates.

Ankartross

· #15 · Jan 28, 2015

streetglide14 said:
That is a possibility.

Ankartross, you should check with your local Harley dealer for the facts on these updates.

OK, will do
But it would be interesting to know if the P/N number is the same in the "Hardware" and txt file for those who did manage to download

GoldenHands

· #16 · Jan 30, 2015

the software page

There is a page for the software downloads for international HD riders.
Here it is...

Harley-Davidson® Infotainment | Harley-Davidson International

You need a clean and empty USB and only place the unzipped iso file on the USB. Put the bike in ACC and turn on the radio. Then put in the USB. The Bike will take over the rest. Acknowledge the software update and just wait. A progress bar is shown onscreen... It reboots at 8/10 and 9/10 and at the end shows when the USB can be removed

Ankartross

· #17 · Feb 1, 2015

GoldenHands said:
There is a page for the software downloads for international HD riders.
Here it is...

Harley-Davidson® Infotainment | Harley-Davidson International

You need a clean and empty USB and only place the unzipped iso file on the USB. Put the bike in ACC and turn on the radio. Then put in the USB. The Bike will take over the rest. Acknowledge the software update and just wait. A progress bar is shown onscreen... It reboots at 8/10 and 9/10 and at the end shows when the USB can be removed

Yes this is how it should be done-THANKS

dub

· #18 · Feb 1, 2015

Thank you. Easy peasy

dub

· #19 · Feb 1, 2015

what it looks like while updating

See less See more

speed4tu

· #20 · Feb 3, 2015

I updated mine and now when I start the bike up, connect to bluetooth and play my audio I have to switch back to fm then back to bluetooth to get it to play at maximum volume. Seems I should have kept the last update.

1 - 20 of 20 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.