Harley Davidson Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
3,723 Posts
Discussion Starter · #1 ·
Not for anything on a bike, but how about a hydraulic jack/pump? After like 5 years, my Harbor Freight Lift Table hydraulic jack/pump has started to leak. I've read some threads in the past and heard of different aftermarket pumps that you can swap out the OEM one for, but also came across a few videos where guys have used this stuff called "AT 205 Re-Seal" mixed in with the pump oil and it fixed the leaky seals. Took a couple of days and a few actuation, but actually stopped the leak. Other videos on other types of equipment as well. Anybody here ever use it before with good or bad results? $20 at NAPA is a lot cheaper, faster,and easier then trying to get an OEM pump from HF and swapping it out.


 

· Registered
Joined
·
7,604 Posts
I have used AT 205 in a transmission that wasn't shifting properly. It helped. I did try some I had in a jack and it didn't help, but the floor jack had packing type seals, so I don't think it would have helped in this case.
 
  • Like
Reactions: MotoJockey
1 - 2 of 2 Posts
Top