Harley Davidson Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
82 Posts
Discussion Starter #1
I'm looking for a spot to put a psi guage for my arnott's on my SG and was thinking if I could get a gauge to replace the useless air temp gauge...has anybody done this? If so, any idea of what the spec's are on the stock gauges? They look like 2"...

thanks!


Sent from my Motorcycle iPad app
 

·
Registered
Joined
·
7,340 Posts
Yes, I believe that they are 2" gauges.

Swapping the gauge itself is very easy. You just pull the outer fairing and remove the plugs and two nuts from the back of the gauge. It then pushes right out the front of the inner fairing.

I know a lot of guys who have swapped that spot for an oil temp gauge. That's what I would probably do if I wanted to change something into that hole.
 

·
The Angry One
Joined
·
10,578 Posts
Just buy a Autometer gauge, they have a silverfaced model, and Summit Racing will be your cheapest bet.

I changed out my air temp gauge for a air pressure gauge.

Sent from Motorcycle.com Free App
 
1 - 4 of 4 Posts
Top