Harley Davidson Forums banner

1 - 5 of 5 Posts

·
Ayubowan!
Joined
·
115 Posts
Discussion Starter #1

Attachments

·
Ayubowan!
Joined
·
115 Posts
Discussion Starter #3
Jay,
Did you put it on both the DX and Roak King?
No, this is for air cools with cable clutch. I am putting a slippery clutch on my DX.

"This is a easy pull clutch kit. Fits the 1987 and newer BIG TWIN models, with the exception of the 1986-1990 FXR models. Will fit up to the 2005 twin cam models. Reduces the amount of effort needed to operate the clutch lever. Complete clutch disengagement is still achieved. The cover that the clutch cable goes into, will need to be removed. The alloy spacer goes over the end of the clutch cable at the bottom, to remove the extra play in the cable, The arm just attaches to the clutch mechanism."
All '06 models and up have the easier pull clutch.(I think)
 

·
Registered
Joined
·
5,675 Posts
No, this is for air cools with cable clutch. I am putting a slippery clutch on my DX.

"This is a easy pull clutch kit. Fits the 1987 and newer BIG TWIN models, with the exception of the 1986-1990 FXR models. Will fit up to the 2005 twin cam models. Reduces the amount of effort needed to operate the clutch lever. Complete clutch disengagement is still achieved. The cover that the clutch cable goes into, will need to be removed. The alloy spacer goes over the end of the clutch cable at the bottom, to remove the extra play in the cable, The arm just attaches to the clutch mechanism."
All '06 models and up have the easier pull clutch.(I think)
Maybe, as my 07' RKCl is not a problem as far as clutch stiffness is concerned.
 
1 - 5 of 5 Posts
Top