Harley Davidson Forums banner

1 - 15 of 15 Posts

·
Registered
Joined
·
83 Posts
Discussion Starter #1
Got a 98 Low Rider, put new bars on it, rewired eveverything right, now trying to stick the wires back into the backbone, but it's very very difficult, anybody know a easy way to do it
 

·
Retired citizen
Joined
·
23,364 Posts
Squirt them up with silicone spray too get them slippery then pull from the other end.
 

·
Poser Member # 99
Joined
·
17,652 Posts
Could you use a Fish tape or stiff wire to pull with !!!!!!!


Silicone lube is your friend works good on Snow blowers too keep snow from Sticking as bad
 

·
Asylum Inmate
Joined
·
11,741 Posts
Go to home depot or lowes, or the local electrical supply house. Get wire lube. This is a lube made specifically for pulling wires through tight locations and over stuffed conduits.

While you are there ask if they have a small section of Wire pull string. Blow or suck that through and lube that sheathing up and it will slide straight through.
 

·
Harley Rider
Joined
·
10,488 Posts
All of those things mentioned....
 

·
Registered
Joined
·
1,313 Posts
I saw a guy suck the string through a 2 inch pipe with a vacuum to pull the new 4 wire breaker box lead from the meter into the house easy to do lube he wires as stated
 

·
Registered
Joined
·
717 Posts
Actually I just kept adding a nine in another forum until it took Robert for a user name. And have been using them ever since.

And you're right didn't keep her she was a slut. But damn she gave good head.??
 

·
Lost in Space
Joined
·
6,859 Posts
Was hoping she was more of a personal slut.
 
1 - 15 of 15 Posts
Top