Aye! I bought a couple tools to help get the alignment and tension just right. Also bought a can of permatex belt conditioner to soak the belt with. I'll clean the belt well first with some dish soap and a toothbrush.They will squeak if belt is not adjusted right.
Lowbrow customsMine is a 70T oem I do believe. Will that 65 t work ?
also , it says that chain conversion kit is not compatible with my 2006 HD Dyna Street Bob
Thank you very much for the suggestions, though!
My 87 FXST uses a 70 tooth sprocket. If I put a ,65 tooth sprocket on will it increase the speed or not. Right now I'm pushing RPM,s to drive 65 or aboveHere is a thought used one on Ebay $ 77 bucks
HARLEY Rear Sprocket / Pulley Touring Softail Dyna 65 T 1-1/4" Wide 17843 R04 | eBayRear Driven Sprocket / Pulley 65 Teeth - used PN 40217-79A Genuine HD used 65 teeth by 1-1/4" black rear sprocket. Fits Touring, Softail and Dyna models with 1-1/4" belt. See the list below. COUNT THE TEETH ON YOUR SPROCKET TO ASSURE THE CORRECT FIT. You are buying what is pictured. Nothing...www.ebay.com
Start a new thread, this thread is for DynaOsix, it get too confusing if more than one person is being answered in the same thread.My 87 FXST uses a 70 tooth