Harley Davidson Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
146 Posts
Discussion Starter #1
upgrading my 03 to a hydraulic. have plate, need everything else... chains, sprockets, bolts, spacers...ect
 

·
Registered
Joined
·
930 Posts
I have 4 new inner cam bearings.... (They are upgraded Torrington roller bearings)

New rubber O ring for the cam plate

New bolt for plate

1- Spacer
ImageUploadedByMotorcycle1427037361.217277.jpg
 

·
Registered
Joined
·
146 Posts
Discussion Starter #3
have the bearings (B148) and o ring for oil pump and cam plate o rings thanks
 

·
Banned
Joined
·
71 Posts
upgrading my 03 to a hydraulic. have plate, need everything else... chains, sprockets, bolts, spacers...ect
have the bearings (B148) and o ring for oil pump and cam plate o rings thanks
You will reuse the chains, sprockets and bolts ( use LocTite on them ) .
You can buy the spacer kit, but most don't need a new spacer, even if you do you can get a single one from an Indie , 5 bucks...kit is 12 bucks .

You will need either a new set of push rod o-rings and a set of head cover gaskets or a set of quick install push rods and tubes .

You will also need a new cam cover gasket.

Did you get the newer style oil pump, if not, it's well worth it to buy it .
 

·
Registered
Joined
·
146 Posts
Discussion Starter #5
You will reuse the chains, sprockets and bolts ( use LocTite on them ) .


Did you get the newer style oil pump, if not, it's well worth it to buy it .
please explain to me 2 things:

1) just how do you think I'm going to use the chains and sprockets from an 03 plate on a hydraulic (07-up) plate?

2) I HAVE to buy the newer style pump cause, AGAIN, the old one wont fit on the newer plate

thanks for all the replys, but I now have everything I need
 

·
Banned
Joined
·
71 Posts
please explain to me 2 things:

1) just how do you think I'm going to use the chains and sprockets from an 03 plate on a hydraulic (07-up) plate?

2) I HAVE to buy the newer style pump cause, AGAIN, the old one wont fit on the newer plate

thanks for all the replys, but I now have everything I need
1) Exactly what plate did you get then . Part Number ?????
2) My plate came with the new pump , and all o-rings needed to install it .

Did you just get a take off plate for somewhere and now are trying to make it fit ?????? If you did , did you look to see if the cams would fit . The 07 and up cams are a bigger bearing size . Tho they do offer hybrid cams to make that work .


:biker:
 

·
Dirty Member
Joined
·
1,142 Posts
please explain to me 2 things:

1) just how do you think I'm going to use the chains and sprockets from an 03 plate on a hydraulic (07-up) plate?

2) I HAVE to buy the newer style pump cause, AGAIN, the old one wont fit on the newer plate

thanks for all the replys, but I now have everything I need
Hmm - :spar:mooning::mooning::mooning::spank::bowrofl::dunno:2guns
 
1 - 7 of 7 Posts
Top