Harley Davidson Forums banner

Mirror Mount Broke

1100 Views 2 Replies 2 Participants Last post by  webco2
Long story short, I got a buddy (really I do, its not me asking incognito) who's mirror was loose and over torqued it and broke the hollow stud off the bottom of the mirror. Any advice on fixing it? It is off an 09 muscle with the LED lights.

My initial thought was figure out how to remove the light or stuff the wires up the mirror stem. Then either drill and tap, or insert a heili coil so I could put a hollow stud with red lock tight in it and fish the wires back out. Sounds good in theory, but fishing for ideas from others who may have experienced it already.
1 - 3 of 3 Posts
No Ideas? Should I re-post in a different section ??? Just thought I would have heard something.
No Ideas? Should I re-post in a different section ??? Just thought I would have heard something.
Buy a new mirror. :thumbsup


Nothing you do will last long or is worth the trouble to do . :fitz


:coffee:
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top