Harley Davidson Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
Not sure where this question fits into a category, but is their a way or part made that can raise the forward controls. I see plenty of brackets that extend the controls, but nothing to raise them up and inch or more for ground clearance. The particular forward controls I have came with the bike (2004 custom softail) and constantly hit/scrape on the right side due to the pivot point of the rear brake mechanism being a low point. I'm in the process of raising the suspension up a bit because it sits pretty low, but that right side control can be scary when it digs in hitting a corner too hot.

Seems to me, that if a bracket could be made or exists to move up the control a bit, that would solve a lot of the problem with it hitting. Another move would be to buy/try a different type on control that has a different design for more ground clearance. I attached a similar control to give an idea of what is hitting the ground first. Thanks for any help or smart ass comments.

Automotive lighting Cameras & optics Auto part Cable Machine
 
1 - 1 of 1 Posts
Top