Harley Davidson Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
130 Posts
Discussion Starter #1
Trying to remove the lifter screen on my evo big twin but the flathead bolt its a c*nt to take out. Any tips?
 

·
Registered
Joined
·
781 Posts
yea it is...i have an evo n made a tool for it out of a piece of steel...but you can take the stub handle flat head from most any normal screw driver set...then take a big cresent wrench and put it on the handle n adjust it down to fit tight...then put alot of down pressure on the screw driver handle and use the cresent for leverage to turn
 

·
Just Ride
Joined
·
3,366 Posts
I ended up using the tap with the flat screwdriver and hammer techinic on my old Evo. There is a hex head aftermarket conversion on the market.
 

·
Registered
Joined
·
130 Posts
Discussion Starter #5
I ended up using an impact screwdriver I bought for $20. Works like a charm and will loosen ANYTHING.
 
1 - 5 of 5 Posts
Top