Harley Davidson Forums banner

1 - 20 of 42 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #1 ·
New speedometer

Hi,
Need your help
I have fat boy 2013
I replaced new speedometer and I can't reset the km
Appear 9999999, how can I change it to the real km I did
Thanks for your help
eliran
 

·
Just Ride
Joined
·
3,600 Posts

·
Registered
Joined
·
3,173 Posts
Has to be flashed at the dealer. You will need the old speedo for them to get the mileage right

It may be that the purpose of your life is to serve as a warning to others.
 

·
Registered
Joined
·
18 Posts
Discussion Starter · #4 ·
hello
I have fatboy 2013
I installed new speedometer PN 74777-11A
the speedometer screen show 999999 km
my bike has plug with 6 pins and the cable adapter that i got with the speedometer has 4 holes and i have problem to connect the speedometer to the plug so i couldn't transfer the real km data from the computer bike to the speedometer.
my dealer cant help and he dont has any idea how to solve this issue,
can any one help me how to solve it?
I tried more then 6 month also with harley but nothing.
 

Attachments

·
Resist Tyranny
Joined
·
1,881 Posts
It's been a while since I did this but I think the cable adapter plugs into a connector under the seat assoc. with the ECM that transfers the data and then you mount the speedo in the dash and hook up the speedo connector without the adapter.

later, dozer

p.s. didn't it come with instructions?
 

·
Registered
Joined
·
12,761 Posts
What Dozer said. I had to plug into ECM cable with cable you show in your picture, one with the red female end. Then follow instructions to input mileage from ECM which stores true mileage to new speedometer. Then install meter on bike to allow it to marry up to bike after 30 miles. I will go dig out my old speedo with cables see if it matches that cable with the white connector in your picture. That one does not look familiar.
 

·
Registered
Joined
·
12,761 Posts
duplicate post sorry
 

·
Registered
Joined
·
12,761 Posts
Looks like they gave you adapter for older model Softails. One you pictured matches my adapter. Picture show model of my meter and years it fits. Its fuzzy but it will not fit your 2013. Need adapter to fit your speedometer, while other end still matches your ECM, Good Luck Stay Safe Over there.
 

Attachments

·
Registered
Joined
·
18 Posts
Discussion Starter · #9 ·
I have the instructions and follow as they write
I ride on the bike 30 miles but the real km still
Show 999999km
Harley said to me this is the correct cable
And I try to explan them that it not fit to my bike plug.
Is there any solotion to fix it?
Thanks.....
 

·
Registered
Joined
·
12,761 Posts
I have the instructions and follow as they write
I ride on the bike 30 miles but the real km still
Show 999999km
Harley said to me this is the correct cable
And I try to explan them that it not fit to my bike plug.
Is there any solotion to fix it?
Thanks.....
May be it looks like it does not fit. Have you tried to put it on? Go to your Harley dealer and ask to see another meter that fits your bike to see the cable? Ask if one of there Techs can do the hook up. Take your old meter with you compare connector ends. If there Tech cannot get it to work than its wrong one. Ride safe.
 

·
Registered
Joined
·
18 Posts
Discussion Starter · #11 ·
adapter cable

hi
i have FAT BOY 2013
i bought new speedometer (combination speedo/tach)
my bike has connetor with 6 pin but the adapter cable i got with the sppedometer has 4 pin.
my Question is how can i match between them
is it possible to connect between them?

thanks for your help
 

·
Banned
Joined
·
71 Posts
We would need more information first. Model and number of new speedometer would help .
 

·
Registered
Joined
·
18 Posts
Discussion Starter · #13 ·
adapter cable for new speedometer

hi
i have FAT BOY 2013
i bought new speedometer (combination speedo/tach)
my bike has connetor with 6 pin but the adapter cable i got with the sppedometer has 4 pin.
my Question is how can i match between them
is it possible to connect between them?
attach some pictures
thanks for your help
 

Attachments

·
Registered
Joined
·
41,294 Posts
Is there really a reason to continually start new threads on this subject when you have MULTIPLE EXISTING threads already started????
 

·
Registered
Joined
·
41,294 Posts
Remove the adaptor cable, now how many pins are on the speedometer cable without the adapter?
 

·
Registered
Joined
·
18 Posts
Discussion Starter · #16 ·
the cable is match to the speedometer but the plugs are no match
in the my bike i have 6 and the cable has 4
 

·
Banned
Joined
·
71 Posts
If you are set on using what you have . Replace the cable ends . Take both plugs apart and replace on cable you will be using . Now all of that presupposes that you understand what each wire is used for .

4-wires are : light, ground, speedometer , tachometer .
6-wires are : light, ground, speedometer, ground, tachometer, ground .
 
1 - 20 of 42 Posts
Top