I tried twice yesterday, downloaded the file, unzipped it, loaded it to a freshly formatted flashdrive, put bike on ACC. waited till the GPS came up, hooked up the flashdrive, and it went to the Authenticating screen and just a circle of dots for quite a while, never got any further.
Software Update 1.22.0.1
I know this update (1.22.0.1) was released December 15, 2017, but I just now had a chance to update my Ultra Limited after being in "Winter Hibernation" for a couple months. In any case, I did not have any issues with the Boom! Box Infotainment update or the Dealer Maps update. I did the Boom! Box update first, followed by the Dealer Maps. I kept notes from the last time I did the update so I didn't have any problems this time.
Sorry if this is old news . . . I was excited to uncover my bike and just spend some time with her!
Premium Boom!™ Box
Version: 1.22.0.1 | Size: 880.8 MB
Date Released: 12/15/2017
File Size: 880.8 MB
Fixes
• Arrival time showed the current time after user deviated from a route.
• Next turn area displayed an arrow with the current street name.
• Special Alpha Jump characters were not displayed.
• The SMS (Short message service) repeat button wouldn’t read the message clearly if pressed multiple times before it has completed the readout.
• Audio paused after loading a ringtone.
• VR (Voice recognition) not working after an ignition cycle.
• Local media preset inconsistent between shutdowns.
• User was unable to search for preferred POI (Point of interest) after simulation sleep.
• Constant “Game Start” pop-ups.
• Presets from USB (Universal serial bus) drive 1 were still visible on USB drive 2 but not highlighted as available.
• Albums and artists heading were mismatched with list.
• AM (Amplitude modulation) radio presets not highlighted when USB was unplugged.
• Repeat button NOT enabled on first selection.
• Pre-cal reset did not delete trails.
• Accept screen appeared for less than 15s after exiting User Off mode.
• Saving or editing emergency number did not work.
• No Siri® pop-up displayed while saving an emergency number.
• Text was missing in the maneuvers list after switching to high contrast mode and then back.
• No initial Siri pop-up initiated.
• Cancel noise was heard when going from VR to Siri.
• Prompt Volume was not updated after changes in Feedback Settings.
• GPS (Global positioning system) entry changed W(O) to E in Spanish.
• WHIM (Wireless headset interface module) – Low battery pop-up was not shown for passenger headset.
• WHIM – Paired Bluetooth® device name appeared as “Headset”.
• Repeat prompt was not working.
• SiriusXM® weather map did not maintain the default zoom level.
• User off mode enabled navigation prompts.
• VR conflict if Siri was launched from phone at the same time with the radio.
• Saved USB presets for drive 2 were replaced by drive 1 after an ignition cycle.
• USB saved as favorite was not highlighted after an ignition cycle.
• Distance to next action bar disappeared before route recalculation instead of being grayed out.
• “Navigation is not ready” displayed when initiating navigation command to “Find Next Gas Station” via VR.
• Various bug fixes
Sorry if this is old news . . . I was excited to uncover my bike and just spend some time with her!
Premium Boom!™ Box
Version: 1.22.0.1 | Size: 880.8 MB
Date Released: 12/15/2017
File Size: 880.8 MB
Fixes
• Arrival time showed the current time after user deviated from a route.
• Next turn area displayed an arrow with the current street name.
• Special Alpha Jump characters were not displayed.
• The SMS (Short message service) repeat button wouldn’t read the message clearly if pressed multiple times before it has completed the readout.
• Audio paused after loading a ringtone.
• VR (Voice recognition) not working after an ignition cycle.
• Local media preset inconsistent between shutdowns.
• User was unable to search for preferred POI (Point of interest) after simulation sleep.
• Constant “Game Start” pop-ups.
• Presets from USB (Universal serial bus) drive 1 were still visible on USB drive 2 but not highlighted as available.
• Albums and artists heading were mismatched with list.
• AM (Amplitude modulation) radio presets not highlighted when USB was unplugged.
• Repeat button NOT enabled on first selection.
• Pre-cal reset did not delete trails.
• Accept screen appeared for less than 15s after exiting User Off mode.
• Saving or editing emergency number did not work.
• No Siri® pop-up displayed while saving an emergency number.
• Text was missing in the maneuvers list after switching to high contrast mode and then back.
• No initial Siri pop-up initiated.
• Cancel noise was heard when going from VR to Siri.
• Prompt Volume was not updated after changes in Feedback Settings.
• GPS (Global positioning system) entry changed W(O) to E in Spanish.
• WHIM (Wireless headset interface module) – Low battery pop-up was not shown for passenger headset.
• WHIM – Paired Bluetooth® device name appeared as “Headset”.
• Repeat prompt was not working.
• SiriusXM® weather map did not maintain the default zoom level.
• User off mode enabled navigation prompts.
• VR conflict if Siri was launched from phone at the same time with the radio.
• Saved USB presets for drive 2 were replaced by drive 1 after an ignition cycle.
• USB saved as favorite was not highlighted after an ignition cycle.
• Distance to next action bar disappeared before route recalculation instead of being grayed out.
• “Navigation is not ready” displayed when initiating navigation command to “Find Next Gas Station” via VR.
• Various bug fixes
1 - 9 of 9 Posts
Thanks for posting the list of fixes. I'm typically leery of the updates, but this one sounds worthwhile.
Just completed the updates. No problems. I cleared the Boom Box update from the flash drive before I updated the dealer map.Thanks for posting the list of fixes. I'm typically leery of the updates, but this one sounds worthwhile.
Has anything changed in the update method?
I've updated before without issue... now it doesn't recognize any file on the USB drive, thou the drive lights up showing it's connected. The file is there, and extracted just like before... tried about 10 times since release, finally gave up.
I've updated before without issue... now it doesn't recognize any file on the USB drive, thou the drive lights up showing it's connected. The file is there, and extracted just like before... tried about 10 times since release, finally gave up.
I started by clearing my USB Flash Drive by deleting any old software updates (I have a flash drive dedicated to Harley-Davidson updates). After downloading the software update to my computer (I am a PC user), I opened the Zip Folder and copied the Disk Image File to my flash drive. Turned the ignition switch to "Accessory", waited for the Boom! Box to turn on so I could hit "Accept" (like I do anytime I start my bike up, then plugged the flash drive in and the software downloaded without any issues. There were 10 updates so it took about 15 minutes for everything to download.
For the Dealer Maps, I opened the Zip Folder and copied the Disk Image File and the nng Folder (again after deleting the software from the flash drive for the Boom! Box update) to my flash drive, Turned the ignition switch to "Accessory", waited for the "Accept" prompt, then plugged the flash drive in just like above and let it do its thing. The Dealer Map download took a couple minutes and I was done.
P.S. Found out the embarrassing way that the battery in my Key Fob was dead . . . I moved my bike off of the wheel chock I had it stored in and the alarm chirped twice and then sounded for the neighbors to hear. Replaced both Key Fob batteries this morning so I am good to go. Only other problem . . . It's SNOWING AGAIN. Looks like I'll have to go back to watching YouTube videos of others enjoying their Harley-Davidsons while mine sits in the garage.
For the Dealer Maps, I opened the Zip Folder and copied the Disk Image File and the nng Folder (again after deleting the software from the flash drive for the Boom! Box update) to my flash drive, Turned the ignition switch to "Accessory", waited for the "Accept" prompt, then plugged the flash drive in just like above and let it do its thing. The Dealer Map download took a couple minutes and I was done.
P.S. Found out the embarrassing way that the battery in my Key Fob was dead . . . I moved my bike off of the wheel chock I had it stored in and the alarm chirped twice and then sounded for the neighbors to hear. Replaced both Key Fob batteries this morning so I am good to go. Only other problem . . . It's SNOWING AGAIN. Looks like I'll have to go back to watching YouTube videos of others enjoying their Harley-Davidsons while mine sits in the garage.
I have never updated any of mine. Too many folks have problems once they update. I recently updated my phone and I hate it now. Cannot go back to before the update on the phone, not sure about bikes. I'll just stick with mine, it works fine as is.
I have now tried to update to latest version "1.22.0.1" for my RG CVO. I have tried 5 times with a fresh 16GB flash drive. I receive the message "The USB image is incompatible or corrupt"... What to do?
Watch the video on the Harley update page. You have to download the update. Extract it then copy it to your usb.I have now tried to update to latest version "1.22.0.1" for my RG CVO. I have tried 5 times with a fresh 16GB flash drive. I receive the message "The USB image is incompatible or corrupt"... What to do?
1 - 9 of 9 Posts
Harley Davidson Forums
A forum community dedicated to all Harley-Davidson model owners and enthusiasts. Come join the discussion about performance, modifications, troubleshooting, builds, maintenance, classifieds and more!
Full Forum Listing
