Harley Davidson Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
7,340 Posts
Any way to see if I have this on my bike? Bought it used from a dealer.
There is nothing visible that would tell you. If you have a tach, take it out, warm it up and then run it up in first gear until the limiter kicks in. If it kicks in at 5700 or so, it's stock. If it hits 6200, it has some kind of mod and is most likely the DL. Hitting the limiter will not damage the motorcycle.

If there are no other mods to the bike, it likely doesn't have the DL.

Or just take it back to the dealer and ask them to stick on their scanner. They could find out in a minute. They ought to do it for free if they are good.


Sent from Motorcycle.com App
 

·
Just Ride
Joined
·
3,195 Posts
Usually the plastic around your air cleaner is gone, open back you can feel the filter. Most of the time that is done with a stage 1. Got free flowing pipes? Dealer can run vin for service records.

Sent from Motorcycle.com Free App
 

·
Acta Non Verba
Joined
·
2,093 Posts
The stage 1 download has a part number that will show up on the odometer screen when you go through the diagnostic codes, look in the electrical section to find out how to do it on your bike.

Seeing when the rev limiter kicks in it the easiest method though, it should be about 6200 if it's been tuned or has the download.
 
1 - 5 of 5 Posts
Top