Harley Davidson Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
The tach on my 04 Ultra Classic stopped working. not just that but cruise indicator light, and gauge light. all other gauges work fine. Any ideas as to where I should start looking or does everything stop if the tach stops?
 

·
Retired citizen
Joined
·
24,366 Posts
Check for codes, the procedure is a sticky in the electrical section.
Also the wire connector might have come loose at the back of the tach.
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #4 ·
Today I went ahead and pulled the fairing and checked the wiring. Had good power for the light and tach. Ordered a new tach tonight. Oh the ground was good too. I'll let you guys know how I made out. Thanks for the help.
 

·
Retired citizen
Joined
·
24,366 Posts
No codes ?
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #6 ·
I found another tach and plugged it in. everything works fine now. Who would have thought? Never threw a code. Alls good again. Thanks for the advice. Now, the only thing wrong is all this snow and cold here in western New York.
 
1 - 6 of 6 Posts
Top