Harley Davidson Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
403 Posts
Discussion Starter #3
Came out of a s&s with a Axtell 106 build by Weiss at cycle rama. Have talked to them since I posted this. He vaguely remembers them, done back in 2001. Said a beehive style might be better. Doubts if I can find them. .674 lift 280 dur. on the cam I have now. So it needs some good springs. Thinking about putting a smaller lift cam in to make it easier on the valve train. Bike is mostly on the strip now. Lots of head work done, not sure how much I will lose with a lower lift cam.

Sent from Motorcycle.com Free App
 

·
Registered
Joined
·
1,940 Posts
Bob Wood offers his springs(PSI) with a lifetime warranty, and the AV&V beehives are a VERY GOOD spring as well, at VERY GOOD pricing.
We use/stock both.
Scott
 

·
Registered
Joined
·
403 Posts
Discussion Starter #5
Will check it out. Thanks much. After checking out some other cam specs. Think I still want to stick with what I have. Do not want to lose any of my head work performance with a lower lift cam.


Sent from Motorcycle.com Free App
 
1 - 5 of 5 Posts
Top