Harley Davidson Forums banner

1 - 13 of 13 Posts

·
SoundMan
Joined
·
576 Posts
Discussion Starter #1 (Edited)
I recently had the forward control kit installed on my 2014 Superlow 1200T. The Harley service guy told me the plain black rubber pegs are the only pegs that will fit the forward control kit. I find that to be hard to believe. I had the Harley Mini Floorboards mounted on my mid controls. My question is, is there any way to use my Mini Floorboards on the forward control kit. I think the part that accepts the pegs is called the clevis (could be way off on this), but can that be changed to accept different pegs and possibly my mini floorboards? The peg that's on there now is offset. Thanks
 

·
Registered
Joined
·
373 Posts
I have aftermarket forward controls idk if they are Harley or not I traded my mids with someone on Craigslist. My forwards the pegs go on the exact same on forwards as mids so anything that fits the mids would fit the forwards


Sent from Motorcycle.com Free App
 

·
SoundMan
Joined
·
576 Posts
Discussion Starter #4
I have aftermarket forward controls idk if they are Harley or not I traded my mids with someone on Craigslist. My forwards the pegs go on the exact same on forwards as mids so anything that fits the mids would fit the forwards


Sent from Motorcycle.com Free App
I wish that was true with the late models Sportsters. Check out the clevis adaptor and the description and you'll see what I mean...
Drag Specialties Offset Clevis Footpeg Conversion Kit For Harley Sportster C/V/X 2011-2014 - RevZilla
 

·
Registered
Joined
·
140 Posts
Precision Billet, Chandler AZ, just came out with an adapter for their mini floor boards that fit the newer sportsters. They might not have them on their website yet. I just was over there Friday and saw them.
 

·
SoundMan
Joined
·
576 Posts
Discussion Starter #7
Precision Billet, Chandler AZ, just came out with an adapter for their mini floor boards that fit the newer sportsters. They might not have them on their website yet. I just was over there Friday and saw them.
Checked out their website but saw nothing. I'll keep checking though. Thanks for the heads up
 

·
SoundMan
Joined
·
576 Posts
Discussion Starter #12
I wanted to put different foot pegs on my 2014 xl1200c, but one ear of the clevis is longer than the other ear.
Hey Sportyman check out my post titled "Kuryakyn Mini Boards On My Sportster." It might be something you're interested in.
 

·
Registered
Joined
·
20 Posts
I bought the ones I wanted and machined .140 thousanths" off of the proper shoulder. I should have taken .145" instead, but all is well and works just fine.

Bob
 
1 - 13 of 13 Posts
Top