Harley Davidson Forums banner
1 - 19 of 19 Posts

·
Registered
Joined
·
527 Posts
Discussion Starter · #1 ·
pulled out the tw555s with 4K miles on them and like new if anyone is looking for a set for thiers. twin cam chain drive from 08 flhx
 

·
Registered
Joined
·
527 Posts
Discussion Starter · #2 ·
woods tw555 cams

woods tw555 cams for twin cam with 4K miles on them, went with bigger cams and these are like new. have all paper work and box they came in asking $250
 

·
Lost in Space
Joined
·
6,859 Posts
Was wondering the same thing. My king has a set of woods in her when I bought her. Any issues with them
 

·
Registered
Joined
·
527 Posts
Discussion Starter · #7 ·
the cams with my TTS tuner,SE heavy breather and rinehart true duals (3.5") dynoed 89.5 hp and 100 ft/lb tq on a all stock 08 96". not bad.
just going to a 107" with head work, bigger cams and a D&D boarzilla now so they are for sale
 

·
Registered
Joined
·
1,940 Posts
Built a 107"/S&S .585's/HPI 55mm/etc/etc, for a cat from Rouses Point, NY.
Was tuned at a tuning center near Batavia, NY.
129 hp, 124 ft/lbs.:)
Scott
 

·
Registered
Joined
·
527 Posts
Discussion Starter · #9 ·
Built a 107"/S&S .585's/HPI 55mm/etc/etc, for a cat from Rouses Point, NY.
Was tuned at a tuning center near Batavia, NY.
129 hp, 124 ft/lbs.:)
Scott
thats the kind of numbers im looking for there. going with a little more cam than that with a 58mm HPI. wanting to break 130hp
 

·
Registered
Joined
·
1,940 Posts
thats the kind of numbers im looking for there. going with a little more cam than that with a 58mm HPI. wanting to break 130hp
The intake side had 1.725 rockers resulting in .615" lift.
A Wood 9F would be a contender, and the 58mm may add power as long as the head is up to it.
Did a 107" (4 1/8" bore) for a client from East Greenbush, NY, some years ago, and followed our recipe, soup to nuts...........it was well over 130.:thumbsup
Scott
 

·
Registered
Joined
·
527 Posts
Discussion Starter · #11 ·
I had toyed with the idea of going with those ratio rockers on the 555 and leaving it in there but just decided to go with a whole different cam
 

·
Registered
Joined
·
527 Posts
Discussion Starter · #13 ·
made 132.81 HP/127.32 TQ with the new set up
 

·
Registered
Joined
·
527 Posts
Discussion Starter · #16 ·
107" 10.3 or 10.5 to 1 not sure till see invoice CP Pistons, bigger valves, bronze guides, fully ported stock cyl heads, 50mm SE throttle body, S&S gear drive set up, S&S easy start 635HO cams, still have the TTS master tune, SE tapered push rods, SE heavy breather, Took rinehart true duals off for a D&D boarzilla 2 into 1 pipe
 

·
Registered
Joined
·
527 Posts
Discussion Starter · #17 ·
still for sale $225.00
 

·
Registered
Joined
·
527 Posts
Discussion Starter · #19 ·
traded the true duals for a D&D fat cat. it is for sale
 
1 - 19 of 19 Posts
Top