What can I do to stop the front of my 2012 dyna street bob from shaking all over the road at high speeds? Just up around 90-100mph it will shake and wobble like crazy. I have a friendly wager tomorrow with a gxsr 600 street bike in the quarter mile and in the half mile with a friend of mine who talks way to much about his Japanese plastic toilet paper roll like it's gonna blow me away. I don't think he can do it but I have no idea. I do know that I have never been over 100mph on my Harley because it shakes way to much and makes me nervous. Specially since I don't own a helmet.
Chicken Joe
That 600 GSXR is gonna eat your lunch. You don't stand a chance, if he knows how to ride.
You can have the wheel balance checked, make sure the wheel bearings are good, and etc. Is the tire cupped at all??
You can have the wheel balance checked, make sure the wheel bearings are good, and etc. Is the tire cupped at all??
Ahh , hope your not bettin any money . He's gonna pass you at 95-100 when your bike starts a tank slapper , he'll be laughing as he passes you !
Tell him you just want to race for 150 feet . Better get that fixed pronto !
Tell him you just want to race for 150 feet . Better get that fixed pronto !
Make sure your tires are balanced, not rotted with even wear all around. Then check your bearings and then check your stem and axel are torqued to spec
I had this same problem. I first adjusted the head bearing, that helped a little but the shake/wobble at the front of the bike was still there. I'm thinking it's our rubber engine mounts that are at the root of the problem. I installed a truetrac and the problem is completely gone. I run this bike up over a 100 regularly and have had no wobbling whatsoever since the day I installed the truetrac. Might be worth looking into if you ride like that a lot.
Sent from my XT1254 using Tapatalk
Sent from my XT1254 using Tapatalk
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
