I realize there has been a lot of discussions on this or similar topics. I have a 2007 Heritage FLSTC. my key fob does not have a push button and battery for fob is new. When I push the start button nothing happens. Bike Battery is new pushing 12.6 volts, Have been able to bypass solenoid and starter rotates. All fuses are good. I'm thinking the start switch may be bad. Also what does the alarm antenna doe?
Push start button and get nothing
4 reading
leppelman
61 - 68 of 68 Posts
Joined
·
6 Posts
You lost Chris 🤔 I was saying after chasing money (buying parts) try tell mechanic check starter and he said couldn't be starter. I recently put new starter which was apparently China made. My issue was starter and not switches/wire.
Joined
·
6 Posts
JLR, the main post was people having problems with bike cranking one minute and not next. Where many people chase the problem buying new switches, breaker fuse, tracing wires and issue still exit. Where few rarely think to check starter. My mechanic said it wasn't passing through rely when in fact everything was good but liner inside solenoid on starter was bad and cheaply made causing me the cranking problem. I was just updating the forum.
Joined
·
3,216 Posts
Let this thread die.
Joined
·
6 Posts
Just unfollow Dan....I was just giving update and if someone got questions than let's clarify. Wisdom is knowledge and down the road a person may run across the same obstacle. Seems to me from reading posts was no one knew right answer to the problem. Where as mine ended up being starter solenoid. Have bless night...
Joined
·
3,216 Posts
Please, feel free to unfollow me, put me in your ignore list, I couldn`t care less.
This thread has been knocked off topic and hijacked and resurrected from the dead so many times it needs to be put out of its misery.
Joined
·
6 Posts
I myself glad I ran across it..glad it still existed but unfollow it and you want see it again
Joined
·
1 Posts
Hi, my name is roy.I got the same issue problems with my bike I have 2003 dyna low lowrider i have tested the on off switch, it's fine. I have tested the push button, start it fine power in and out. I've jumped the starter, solenoid to the starter. It turns over the nothing works. When it's all hooked up to start it, what do I do
61 - 68 of 68 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
