You need the removable tour-Pack kit, (which is a different baseplate, and the 4-point quick release brackets that go on the bike. Rack #53276-09B, 4-Point Docking Hardware Kit #54205-09A are the Harley part numbers you need.

 

^^^What he said. I put one on a 2003 Electra Glide and another on my 2015 Ultra...easy peasy install. The Harley instructions aren't too bad, but some youtube videos help too. It's pretty simple and you will like it for sure!

 

What about the electrical stuff, Jimmers?

 

The kit comes with a 'Y' adapter that you plug if you need brake lights. On my 2015 Ultra it came with brake lights/turn signals that fit on the saddle bags...good lookin' too. Everything you need is in the kit.

Here's a couple pics of my gal!!

 

No drilling!! They have some good sticky tape on the lights. Make sure you clean the bags with alcohol to get off old wax and dirt then stick em on. Also, I used a pencil to get the lights lined up correctly. I put it between the light and the rim of the saddlebag lid for equal spacing on both bags. CAUTION: That sticky stuff is really good, so make sure you get it on right the first time!!

 

Question 3: when tour pak is back on, do the saddle lights and tour pak lights all work. I assume that’s what the y connector is for.
:grin

 

I did this conversion last fall to my 2013 FLHTK (Electra Glide Limited), 4 point docking kit, quick release mounting bracket for the tour trunk,
tall backrest and luggage rack. For the 4 point docking kit I went with the factory Harley part for best fit from Boardtracker Harley in Janesville Wisconsin, best price. for all of the other parts I went to https://www.ebay.com/usr/modelllo I believe he is from Michigan his backrest and luggage rack are great. just click the link and go to his online store if you order all of the stuff at the same time he will cut you a deal just make him a reasonable offer.
I will get pics for you when I get home from work if you want. otherwise you will see my bike in April when I come back to Texas.
I also have extra quick release electrical fittings so you can easily plug and unplug the rear tourpak lights.

 

I also put in a new laydown tail light and angled plate bracket.

 

Yep...I did the same!

 

Here are some pics of the bike with the 4 point docking hardware on and the new rear light and plate holder.

 

Here are some pics of the bike with the 4 point docking hardware on and the new rear light and plate holder.

View attachment 690001

View attachment 690009

View attachment 690017

Did you kit not come with the brake/turn signal lights for the saddle bags?

 

I already had the 2 piece seat since this was planned last year.

 

Nice shift levers and primary cover.

 

Thanks guys all parts are ordered and I’m ready to change it up
I carry to much crap anyway


Sent from my iPhone using Tapatalk

 

Thanks guys all parts are ordered and I’m ready to change it up
I carry to much crap anyway, around my midsection.


Sent from my iPhone using Tapatalk

Fixed it for you Delta. :rollin :stir

 

You may as well budget for a solo seat since you will eventually want one. And there are also quick detach kits for lowers available.


Sent from my iPhone using Tapatalk

 

Then he might as well just get a Road King as a 2nd bike.

 

How’s $40 sound?


Sent from my iPhone using Tapatalk

 

Sounds great to me, you have all the bolts and stuff?


Sent from my iPhone using Tapatalk

 

Sent you one too


Sent from my iPhone using Tapatalk

 

I really like the smoked out lights in back. Were you able to keep the bulbs just as bright? I like the look but I want to be as bright or brighter than stock at all times!! Keep the crazies off my ass

 

Okay one last question...

The license plate holder you guys used, do you have a part number. I have to order that today too :devil

 

Okay one last question...



The license plate holder you guys used, do you have a part number. I have to order that today too :devil

I used a soft tail lay back holder

Sent from my iPhone using Tapatalk

 

This one worked for me.

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/322967128071


Sent from my iPad using Tapatalk

 

Here it is so far

Sent from my iPhone using Tapatalk

 

Which lay down license bracket will fit this bike professors


Sent from my iPhone using Tapatalk

 

If you go with the road king style that goes under the taillight, I will send you a stock RK tail light so the plate is lighted. Has the clear lense on the bottom of the taillight.


Sent from my iPhone using Tapatalk

 

Thanks peanut


Sent from my iPhone using Tapatalk

 

I bought the Kuryakyn #3148 in black you can find it from $71.99 on E bay to $80.99 at Dennis Kirk, but I had to drill 3 holes in my fender to mount it, I just primed the inside of the hole using a Q-Tip then painted the inside of the hole the same way with paint to keep everything from rusting.

https://www.ebay.com/itm/KURYAKYN-3...AME-LCS-LAYDOWN-BLK/122852259717?hash=item1c9a90b785:g:DcsAAOSwc6JaZ5wY&vxp=mtr

https://www.denniskirk.com/kuryakyn...black-curved-laydown-license-plate-mount-with-frame-3148.p497935.prd/497935.sku

Amazon.com: Kuryakyn 3148 Black Laydown Curved License Plate Frame: Automotive

 

I bought the Kuryakyn #3148 in black you can find it from $71.99 on E bay to $80.99 at Dennis Kirk, but I had to drill 3 holes in my fender to mount it, I just primed the inside of the hole using a Q-Tip then painted the inside of the hole the same way with paint to keep everything from rusting.



https://www.ebay.com/itm/KURYAKYN-3...AME-LCS-LAYDOWN-BLK/122852259717?hash=item1c9a90b785:g:DcsAAOSwc6JaZ5wY&vxp=mtr



https://www.denniskirk.com/kuryakyn...black-curved-laydown-license-plate-mount-with-frame-3148.p497935.prd/497935.sku



Amazon.com: Kuryakyn 3148 Black Laydown Curved License Plate Frame: Automotive

Didn’t want to drill but if need be it is an option. How many guys drill there fenders to make it work


Sent from my iPhone using Tapatalk

 

Me. ALHOLE

 

I expect shit like that from you hahaha


Sent from my iPhone using Tapatalk

 

But it looks sweet once it's done, and you can still see the plate with the tour pack on, I do not think it will ever be taken off and it looks stock.
Now you just have to get the lay down smoked tail light to complete the look.

 

The light is LED and damn bright and it takes 1 minute to install just 2 screws to remove the old stock lens cover then just unplug stock light, plug in new light and screw in new smoked layed back lens cover.

 

Part number #


Sent from my iPhone using Tapatalk

 

I had a custom dynamics on my bike for a couple of years then I switched to Harley-Davidson Laydown LED Tail Light (136 LED Lights)
you can get it with or without strobe function, mine is with out strobe, but make sure to order with the license plate light.

 

it's not cheap but it looks and works great.